Correcting the Image Color Tone
(Correct Tone)
This function corrects the color tone of a shot still image. You can
add a reddish or bluish tone to the shot image and record the image.
1
Press the 6 (Playback) button.
2
Press the !"#$ buttons to display the file with the
color tone you want to correct.
3
Press the MENU/OK button.
• The Playback menu appears.
4
Press the " button to select
[Correct Tone] and press the $
button.
• The correct tone bar appears in the
image.
• If you selected a file that cannot be
used with this function, an error
message is displayed, and then the
Playback menu appears.
5
Press the !" buttons to
adjust the color tone.
• Press the ! button to add a reddish
tone to the image, or press the "
button to add a bluish tone to the
image.
• You can set the color tone to any of
five levels.
• To cancel color tone correction, press
the DISP. button.
6
Press the MENU/OK button.
• The display indicates that the image is being corrected, and then the
corrected image is recorded. The image before correction is also
recorded.
Correct Tone
Cancel
Ok
3
111