Table of Contents
Advertisement
ABOUT YOUR WATER HEATER
TO TURN OFF THE WATER HEATER
If it is necessary to turn off the water heater:
•
Shut down the gas control (refer to
•
Close the gas isolation valve at the inlet to the gas control.
•
Close the cold water isolation valve at the inlet to the water heater.
TO TURN ON THE WATER HEATER
•
Open the cold water isolation valve fully at the inlet to the water heater.
•
Open the gas isolation valve fully at the inlet to the gas control.
•
Light the water heater (refer to
HOW DO I KNOW IF THE WATER HEATER IS INSTALLED CORRECTLY?
Installation requirements are
The water heater must be installed by an authorised person and the installation
must comply with National Standards AS/NZS 3500.4, AS 5601 and all local
codes and regulatory authority requirements. In New Zealand, the installation
must conform with the Code of Practice for installation of Gas Appliances
NZS 5261 and the New Zealand Building Code.
DOES THE WATER QUALITY AFFECT THE WATER HEATER?
The water heater is suitable for most public water supplies, however some
water qualities may have detrimental effects on the cylinder and fittings. If you
are in a known harsh water area
have your water quality checked against the conditions
HOW LONG WILL THE WATER HEATER LAST?
There are a number of factors that will affect the length of service the water
heater will provide. These include the water quality, the water pressure,
temperature (inlet and outlet) and the water usage pattern. However, your
water heater is supported by a comprehensive warranty
"Close Down Procedure"
"Lighting the Water Heater"
shown on pages
you must read page
6
on page 36).
on page 33).
21
and
22 and
pages
38. If you are not sure,
described on page
(refer to page
26
to
30.
38.
40).
Advertisement
Table of Contents
