Table of Contents
Advertisement
Drive Installation—Pedestal
Mount (All Kits)
Important:
•
For wall mount option, follow instructions for remote
wall in BAS-SVX54*-EN (Operating Instructions:
TR200 New D-Frame, 110–400kW).
•
See
"Drive Dimensions," p. 15
Drawings," p.
17or drive mounting dimensions.
•
See
Figure 8, p. 15
or
dimensions.
1. Determine the desired location for the drive and
position the pedestal in place.
2. Temporarily route power wire conduit to desired drive
pedestal location to check for any routing issues.
Figure 53.
3. Mark the locations for the anchor bolts using the
bottom slots of the pedestal for a template.
AFDR-SVN001D-EN
and
"Pedestal
Figure 10, p. 16
for wall mount
4. Drill the four required holes for the anchor bolts and
install the 3/8-inch anchor bolts.
Figure 54.
Figure 55.
Figure 56.
Installation
43
Advertisement
Table of Contents
