Siemens SIMATIC NET SCALANCE W1788 Series Operating Instructions Manual page 7

Hide thumbs Also See for SIMATIC NET SCALANCE W1788 Series:
Table of Contents

Advertisement

Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing
confidential data in the device memory.
To do this, restore the factory settings on the device.
Also restore the factory settings on the storage medium.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the
WEEE directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a
certified disposal company for electronic scrap or your Siemens contact (Product return
(https://support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs
on-site are not possible.
Trademarks
The following and possibly other names not identified by the registered trademark sign
are registered trademarks of Siemens AG:
SCALANCE, RCoax
SCALANCE W1788-x / W1748-1
Operating Instructions, 03/2022, C79000-G8976-C484-05
Introduction
®
7

Advertisement

Table of Contents
loading

Table of Contents