Erasing - Sony DAT DTC-690 Operating Instructions Manual

A
a) b)
∞
c)
d)
g)
g)
h)
)
7
1
1
2
42
c)
e)
f)
2
£ 8
$ › 1 ¡
• ¶
1
¡
ERASE
END ID
End ID
Note on the point where an end ID is
written Å
During rehearsal function, an end ID is
written at the end of the repeated portion as
illustrated.
a) Repeated portion
b) Point where you pressed END ID WRITE
c) Selection
d) 3 seconds
e) End ID (9 seconds)
f) Each time you press ¡
g) 0.3 sec.
h)Each time you press 1
Normally, the repeated portion is played
back 5 times.
When the 1 or ¡ button is pressed
while the repeated portion is played back,
the repeated portion is played back up to 8
times, and then tape stops.
Note
When recording is finished in the middle of
a tape, be sure to write the end ID at the
end of the last selection.

Erasing

Make sure that the safety tab of the
cassette is closed.
1
Search for the beginning of the end
ID with the ¡ ¡ ¡ ¡ ¡ button. (Page 26.)
When the end ID is detected, the "EE"
indicator lights.
2
Press the END ID ERASE button.
The END ID ERASE indicator lights
while the end ID is being searched for
and then goes off when the end ID is
erased.
Note
When recording from the point where the
end ID is written, the end ID is erased
automatically.