Rear Panel Jacks - Sony DAT DTC-690 Operating Instructions Manual

Digital audio tape deck
Table of Contents

Advertisement

E
LINE IN
LINE OUT
DIGITAL IN/OUT
COAXIAL
OPTICAL
L
L
IN
IN
OUT
R
R
1 2
3 4
14
Location and
Function of Controls
Rear Panel Jacks ‰
1
LINE IN (line input) jacks (phono jack)
Connect to the recording outputs of an
amplifier. Signals supplied by the
amplifier can be recorded using the
sampling frequency of 48 kHz in the
standard play mode or 32 kHz in the
long play mode.
2
LINE OUT (line output) jacks (phono
jack)
Connect to the DAT or tape inputs of an
amplifier. The playback signal of this
deck will be output.
3
COAXIAL/OPTICAL DIGITAL IN (digital
input) jacks (coaxial phono jack/optical
jack)
Connect to the digital outputs of an
amplifier having a built-in D/A converter
or other digital source, such as a CD
player for digital-to-digital recording.
4
OPTICAL DIGITAL OUT (digital output)
jack (optical jack)
Connect to the digital inputs of an
amplifier having a built-in D/A converter
or another DAT deck, for playback of a
DAT cassette or digital-to-digital
recording.
Notes on connection
• Use the connecting cords specified in
the illustrations.
• Turn off the power for all equipments
before making connections.
• Be sure to insert the plugs firmly into the
jacks. Loose connections may cause
hum and noise. When unplugging, grasp
the plug and not the cord.
Note on sound signals
When connecting an optical cable to the
DIGITAL IN/DIGITAL OUT jacks, sound
signals (L/R) are transmitted together
through the cable.

Advertisement

Table of Contents
loading

Table of Contents