Connecting Internal Sensors To The Rtu - Adcon A850 User Manual

Telemetry Gateway A850 User Manual

Connecting Internal Sensors to the RTU

The values of the internal RTU sensors are provided in the data panel of the
RTUs main window. Each connected sensor is also displayed separately in
Explorer and can be edited on the tab. Connect the sensors to the RTU.
1.
2.
3.
4.
5.
6.
You can sort the sensors alphabetically by clicking on "Name". Use the SHIFT
key to select multiple sensors and the CTRL key to deselect sensors.
Confirm your selection with Connect. The sensors appear under "Connected
Sensors".
Confirm with OK. The new sensor is added to Explorer.
Figure 42. Connect Sensors
Lock the configurator for editing.
Navigate in Explorer to the internal sensor called INTERNAL.
Right-click with the mouse to open the context menu.
In the context menu click on Connect Sensors.
A popup window opens with the available sensors.
Select the desired individual and combination sensors.
Adding an RTU Group
,
43
CHAPTER 5