Table of Contents
Advertisement
Chapter 7. Service
This chapter covers procedures for maintenance and disposal of the Telemetry
Gateway to ensure that the device is functioning properly.
Firmware Upgrade
Upgrade the firmware to maintain the performance of your device. This
especially applies to the following:
•
•
•
•
•
To update the device software, 5 firmware files (format: .img) are required:
•
•
•
•
The following upgrade options are available:
•
•
Note
Plan approx. 10 minutes for the upgrade. The upgrade will require restarting of
the Telemetry Gateway. Save the desired configuration settings before
performing the firmware upgrade.
Starting the Upgrade Process
1.
2.
Note
Create a backup before making changes with the configurator. You can restore
the data in the event that errors are made in the configuration settings.
3.
New features
New RTU types
New sensor types
Current security settings
Current debugging settings
Bootloader
Kernel
Firmware
GUI
Web interface (online and offline)
Computer (terminal) and USB
Launch your browser and enter the server URL.
The default address of the ADCON Telemetry Gateway is: 192.168.1.1
The web interface home page opens.
Figure 57. Configurator welcome page
Click on Download Debugging Information to save the diagnostic
functions locally. Enter the user name and password.
Click on Backup Configuration to save your settings locally.
52
Advertisement
Table of Contents
