Adding Internal Sensors To The Gateway; Setting Up Modems - Adcon A850 User Manual

Telemetry Gateway A850 User Manual

Adding Internal Sensors to the Gateway

The values of the internal sensors are displayed in the RTUs main window in
the data panel under Status. Connect the sensors to the gateway.
1.
2.
3.
4.
5.
Note You can sort the sensors alphabetically by clicking on Name. Use the SHIFT key
to select multiple sensors and the CTRL key to deselect sensors.
6.
7.
8.

Setting up Modems

Before you can add RTUs or RTU groups, you need to set up one or more
modems. The modem uses the gateway with stations. For the configuration, see
"Modems" on page
You can use a variety of modems with the Telemetry Gateway:
•
•
Figure 28. Adding internal sensors
Lock the configurator for editing.
Navigate in Explorer to the internal sensor called INTERNAL.
Right-click with the mouse to open the context menu.
In the context menu click on Connect Sensors.
A popup window opens with the available sensors.
Select the desired individual and combination sensors.
Confirm your selection with Connect. The sensors appear under
"Connected Sensors".
Confirm with OK. The new sensor is added to Explorer.
Save the configuration or cancel the action.
49.
Wireless modems
(RA440 with internet connection and/or A440 with cable connection)
GPRS modems
(software program)
36
CHAPTER 5
Setting up Modems