Tm Tm; In The Buzz; To Use As A Carriage; To Install Carrier Onto Stroller - Quinny 1473 User Manual

To Use as a Carriage

To use the Dreami

in the Buzz

TM
NOTE: Read the Buzz Stroller User Guide to remove the
TM
seat from the stroller frame.
To install carrier onto
stroller:
1
Adjust the connection
points using the button
at the center. Be sure
the connection points
are positioned straight
up (Figure 1).
2
The adapters and
corresponding
connection points are
marked with an
"L" (left) and
"R" (right).
Insert the adapter
marked "R" into
the connection
point marked "R"
until you hear a "click"
(Figure 2). Do the
same for those marked
"L". Check to make
sure they are securely
fastened by pulling up
on them.
stroller:
TM
1
2
3
Position the carrier with
the foot of the carrier
toward the handlebars
as shown (Figure 3).
Place the carrier on the
adapters until you hear
a "click."
Pull up on the carrier
handle to ensure it is
securely in place. The
carrier should not release
without pushing the
release buttons.
To remove carrier from
stroller:
4
Press both release but-
tons inside canopy (1)
while pulling up on the
carrier (2) (Figure 4).
5
To remove the adapters,
press the button (1) on
the inside and pull the
adapter out (2) (Figure 5).
4
3
4
5