Record Configuration; Enable - Q-See QT528 User Manual

4.3 Record Configuration

Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp.

4.3.1 Enable

Step 1: Enter into system configurationrecord configurationenable; refer to Fig 4-11:
Step 2: Checkmark record, audio and record time
Step 3: User can setup all channels with same parameters, checkmark "all", then do relevant setup.
Step 4: Click "default" button to restore default setting; click "apply" button to save the setting; click "exit" button to
exit current interface.
Definitions and descriptions of Record:
Fig 4-11 Record Configuration-Enable
Parameter
Record Switch Record on or off
Audio Enable live audio recording
Redundancy
Meaning
21