Operation - Dometic C Series Installation And Operating Manual

Wine storage appliance
Hide thumbs Also See for C Series:
Table of Contents

Advertisement

Available languages

Available languages

Operation

• Ensure that the power cable is not jammed when pushing the wine cooler into
place.
7
Operation
7.1
Before first use
Before first use, clean the wine cooler inside and outside with a damp cloth for
hygienic reasons (see also chapter "Cleaning and maintenance" on page 24).
7.2
Storing bottles
Please note the following:
• Only store wine in wine bottles that are closed and still sealed.
• Do not overload the wine cooler.
• Do not cover the shelves with aluminum foil or any other objects, as this obstructs
the air circulation.
• After a power cut or if the wine cooler has been switched off, wait 3 to 5 minutes
before switching on the wine cooler again.
➤ Position the bottles as shown in fig. 5, page 5 to fig. 8, page 7.
7.3
Saving energy
• Only open the wine cooler as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.4
Switching on and off
➤ To switch on and off, press the
18
button for at least 5 seconds.
C35F, C55F, C75F
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

C34fC55fC75f

Table of Contents