Table of Contents
Advertisement
In the Options window, click on the Audio Setup tab and select your device driver from the pull-down.
在 "选项 " 窗口，点击 "音频设置 " 标签，从下拉菜单中选择你的设备驱动程序。
8.3
Configuring MIDI Devices 配置MIDI设备
From the External Devices window in Studio One Artist, you can configure your MIDI keyboard controller,
sound modules, and control surfaces. This section will guide you through setting up your MIDI keyboard
controller and sound modules. Please consult the Reference Manual located within Studio One for com-
plete setup instructions for other MIDI devices.
在 Studio One Artist 的外部设备窗口中，你可以配置你的MIDI键盘控制器、声音模块和控制面。本节将指
导你设置你的MIDI键盘控制器和声音模块。有关其他MIDI设备的全部设置说明，请查阅Studio One中的
《参考手册》。
If you are using a third-party MIDI interface or USB MIDI-controller keyboard, you must install any
required drivers for these devices before beginning this section. Please consult the documentation that
came with your MIDI hardware for complete installation instructions.
If you do not have any MIDI devices, please skip this section.
如果你使用的是第三方MIDI接口或USB MIDI控制器键盘，在开始本节之前，你必须为这些设备安装任何必
要的驱动程序。有关完整的安装说明，请查阅您的MIDI硬件附带的文件。
如果你没有任何MIDI设备，请跳过本节。
Setting up an External MIDI Keyboard Controller from the Start Page
从开始页，设置一个外部 MIDI键盘控制器
A MIDI keyboard controller is a hardware device that is generally used for playing and controlling other
MIDI devices, virtual instruments, and software parameters. In Studio One Artist, these devices are
referred to as Keyboards, and they must be configured before they are available for use. In some cases,
your MIDI keyboard controller is also used as a tone generator. Studio One Artist views the controller and
tone-generation functions as two different devices: a MIDI keyboard controller and a sound module. The
MIDI controls (keyboard, knobs, faders, etc.) will be set up as a Keyboard. The sound modules will be set
up as an Instrument.
MIDI键盘控制器是一种硬件设备，通常用于演奏和控制其他MIDI设备、虚拟乐器和软件参数。在Studio
One Artist中，这些设备被称为键盘，在使用前必须对它们进行配置。在某些情况下，你的MIDI键盘控制
器也被用作音色发生器。Studio One Artist将控制器和音调发生器的功能视为两个不同的设备：一个
MIDI键盘控制器和一个声音模块。MIDI 控制器（键盘、旋钮、音量控制器等）将被设置为键盘。声音模
块将被设置为一个乐器。
You can set up your external MIDI devices from the Setup area in the Start page. Before setting up a new
Song for recording, take a moment to configure external devices.
Make sure you have connected the MIDI Out of your external MIDI controller to a MIDI In on your PreSo-
nus audio interface (if available) or other MIDI interface. If you are using a USB MIDI controller, connect it
to your computer and power it on.
你可以在 "开始" 页面的 "设置" 区域设置你的外部 MIDI 设备。在设置一个新的歌曲进行录音之前，花点
时间配置外部设备。
确保你已经将外部 MIDI 控制器的 MIDI 输出连接到PreSonus 音频接口（如果有的话）或其他 MIDI 接口
的MIDI输入。如果你使用的是 USB MIDI 控制器，请将它连接到你的电脑上并接通电源。
8.3 Configuring MIDI Devices
87
Advertisement
Table of Contents
