Table of Contents
Advertisement
Power User Tip: Google Meet will switch audio devices automatically to the last device connected to your sys-
tem. There is a chance that the next time you open Google Meet that it may default to a different audio device
without notifying you. Be sure to check your audio settings to make sure Revelator io44 is selected. PreSonus
has no control over how this device selection works.
用户提示： Google Meet 会自动将音频设备切换到最后一个连接到你系统的设备。有可能在你下次打开 Google
Meet 时，它可能会默认为不同的音频设备而不会通知你。请务必检查你的音频设置，以确保 Revelator io44 被
选中。 PreSonus 无法控制这种设备的选择方式。
3.3.6 Using Revelator io44 for OBS 为 OBS使用 Revelator io44
1. Click on Settings under "Controls" . 点击 "控制 "下的设置。
2. Click "Audio." 点击 "音频"。
3. Under Mic/Auxiliary Audio, select Revelator IO44 Stream Mix A. 在麦克风/辅助音频下，选择 Revelator
IO44 Stream Mix A。
4. Under Advanced, set the Monitoring Device to Revelator IO44. This will route the output audio from
OBS to the playback channel of the Revelator io44. 在 "Advanced" 下，将监听设备设置为Revelator
io44。这将把OBS的输出音频路由到Revelator io44的播放通道。
5. Click Apply. 点击"Apply"
6. Click OK. 点击"OK"
Your Revelator io44 is now set-up for OBS! 你的 Revelator io44 现在已经为OBS设置好了!
3.3.7 Using Revelator io44 onChromebook 在 Chromebook上使用 Revelator
io44
While Chromebooks are compatible with Revelator io44, there is no way to run Universal Control for
advanced editing of the settings or effects presets beyond what is directly accessible on the interface
itself. That said, Audio setup in Google Chromebooks is very simple.
3.3.9 Using Revelator io44 with Google Meet on Chromebook
38
Advertisement
Table of Contents
