Planar PDP 42 Product Manual page 31

Watching PIP (Picture In Picture)
Press .
The followings will be displayed : Press
PIP [Large]
This function will work on Analog RGB, Digital RGB, Composite, S-video, and Component signals as inputs to
main screen and Composite, S-Video and Component (480i) as inputs to sub-screen.
When watching PIP, the main screen and the sub-screen may have differences in the quality of screen color.
PBP only works in S-Video, Composite, Component (480i) input signals.
PIP Input(Changing the input signal of PIP)
The following sub-screen will be selected in order :
Press .
1. Composite / 2. S-Video / 3. Component.
※ Component input will display only 480i input.
PIP position (Moving the sub picture)
As you press , the location changes as illustrated next.
※ If the sub-screen does not appear, (only a black screen is shown)
check to see that input terminal is connected.
PIP Swap (How to exchange the main screen from sub screen)
Press , and the main/sub screen will be exchanged.
※ This does not work in Analog RGB, Digital RGB, and
Component (480p, 720p, 1080i).
PIP Sound Swap (How to exchange the sound from the main to sub)
Press , the audio of the main/sub screen is exchanged.
PBP MODE (How to exchange the PBP mode)
Press , the mode of the PBP is exchanged from 16 : 9 to 4 : 3.
to activate PBP at once.
PIP [Small] PBP Normal
3 1