Table of Contents
Advertisement
Connecting to the DVI-I terminal
Some of DTV receivers (Set-Top-Box) have an RGB connector (D-sub 15 pin) instead of a component
output. The DVI adapter, which provides this connection terminal for the PDP, may be used for this con-
nection.
Connect the DVI adapter into the VGA cable and connect to the PDP DVI-I input terminal. Connect the
other end of the cable to D-sub output terminal of DTV receiver.
Connect audio cable from the audio output terminal of DTV receiver to the DVI-I audio input terminal of
the PDP.
How to watch DTV
1. Turn on the PDP monitor and press
2. Use
to select component and then press
3. When connecting DVI-I terminal, use
4. Turn the DTV receiver on and select the channel that you want.
・
DTV video output of 480p or 720p will show the clear and detail image of screen.
on the remote controller.
.
to select RGB1(Analog) and then press
.
2 1
Advertisement
Table of Contents
