Table of Contents
Advertisement
Chapter 3
OVERVIEW
Security Passwords
TERMINAL MENU STRUCTURE
61200221L1-1
Operation
You can configure or control the VCOM Module from any of several
sources (see Table 3-1). The ATLAS 800
instructions on operating each supported source. The remainder of this
chapter describes the menu items available for operating the
VCOM Module using the terminal menu.
Table 3-1. Sources for Controlling the VCOM Module
Source
ATLAS Front Panel
For minimal configuration and status support.
Terminal Menu
For detailed configuration, status and diagnostics.
You must have the appropriate password level to use the terminal menu to
edit items. (See the section Access Passwords in the ATLAS 800
Manual for detailed information on working with passwords.) Each menu
description in this chapter indicates the password levels required for read
and write access.
Security level 1 users can view and edit every available field.
Security level 5 users can view any field but they cannot edit.
ATLAS uses a hierarchical menu to access all of its features. The top-most
menu level leads to submenus that are grouped by functionality (see the
menu tree in Figure 3-1). All submenu items display in the VT-100 terminal
window.
The Modules terminal menu configures and controls the VCOM Module.
The Modules submenu, Type , shows the VCOM Module as VCOM (see
VCOM Module User Manual
PLUS
User Manual provides detailed
Purpose
PLUS
User
3-1
Advertisement
Table of Contents
