Shooting With Face Detection - Casio EXILIM EX-FH20 User Manual

NOTE
• Only " A Camera AS" can be used during movie recording.
• The ISO sensitivity setting (page 38) must be "AUTO" for "S Image AS" to work.
• If the flash fires, the Anti Shake icon will remain on the display, even though Anti
Shake does not function during flash photography.
• Shooting with Anti Shake can cause an image to appear somewhat coarser than
normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• " A Camera AS" may not work properly when the camera is mounted on a tripod.
Either turn off Anti Shake or select "S Image AS".
• When the image size setting is "RAW+" (page 33), this setting becomes "A
Camera AS" when the Anti Shake setting is "D Auto", and "Off" when the Anti
Shake setting is "S Image AS".
Shooting with Face Detection (Face Detection)
Procedure
[r] (REC) * [MENU] * REC Tab * Face Detection
The face detection feature adjusts focus and brightness to the faces in the image.
1.
Use [4] and [6] to select "On" and then press [SET].
2.
Point the camera at the subject (s).
The camera will detect human faces and display a
frame around each one.
3.
Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
4.
Press the shutter button the rest of the way down.
80
Advanced Settings