Using Flash - Casio EXILIM EX-FH20 User Manual

Using Flash (Flash)
1.
Press (Flash up) to open the
ð
flash unit.
• The flash will not fire if the flash unit
is not open.
2.
In the REC mode, press [2] (
once.
3.
Use [4] and [6] to select the flash setting you want and then press
[SET].
Auto Flash
>
Flash Off
?
Flash On
<
Red Eye
¥
Reduction
4.
Press the shutter button to shoot.
N
• Note that the flash unit does not close automatically. After
you are finished using it, you need to close it by hand.
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Back lamp
Flashes red while the flash is charging to indicate that image
recording is disabled.
< indicates the flash will fire.
)
ð (Flash up)
35
Flash
[2] (
Snapshot Tutorial
)