Using Quick Shutter - Casio EXILIM EX-FH20 User Manual

IMPORTANT!
• While the "Anti Shake" setting is "D Auto" or " A Camera AS", half pressing the
shutter will cause the camera to vibrate and emit an operation sound. This is
normal and does not indicate malfunction (page 79).

. Using Quick Shutter

Fully pressing the shutting button without waiting for Auto Focus to operate will record
using Quick Shutter (page 83).
• With Quick Shutter, the camera focuses faster than normal Auto Focus, which
means you can capture quick moving action more easily. Note, however, that some
images may be out of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press the shutter button in order
to ensure proper focus.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.) Point the camera at the
subject and try to focus again.
. If the subject is not in the center of the frame...
"Focus lock" (page 48) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
22
Quick Start Basics