Port And Button Description - TP-Link RE230 User Manual

Chapter 1
1 2 2
Note: The provided plug may differ from the picture due to different regional power specifications.
(WPS) button
Reset button (hole)
Ethernet Port
Downloaded from ManualsNet.com
Name Status
On/Off
(Power)
Blinking
Solid white
Solid red
(Signal)
Blinking
Off
2.4G
On/Off
(2.4GHz)
5G
On/Off
(5GHz)

Port and Button Description

Item
Press the WPS button on your host router, and immediately press
this button on the extender for 1 second. The
should change from blinking to solid on, indicating successful WPS
connection.
Use a pin to press the button for 1 second to reset the extender.
Connect your Ethernet-only device (such as a Blu-ray player, game
console, DVR, or smart TV) to the Ethernet port of the extender to join
the Wi-Fi network.
search engine
Get to Know About Your Extender
Indication
The extender is on or off.
The system is starting up or firmware is being upgraded.
The extender is connected to your router's wireless
network and is in a suitable location.
The extender is experiencing poor signal strength. Try
relocating it closer to your host router.
WPS connection is in progress.
No wireless connection is established.
The extender is connected or not connected to the
2.4GHz wireless network of your host router.
The extender is connected or not connected to the 5GHz
wireless network of your host router.
Description
LED of the extender
4