Set Up The Extender As An Access Point - TP-Link RE230 User Manual

Chapter 6
The extender can work as an access point, transforming your existing wired network to
a wireless one.
6 1
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Click
click OK. The extender will reboot and switch to Access Point mode.
3. After rebooting, connect to the extender's network
Extender_5GHz.
4. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
5. Go to
1 ) Customize your wireless SSID and password and click NEXT.
Downloaded from ManualsNet.com

Set Up the Extender as an Access Point

Change Mode in the top right corner of the page. Select
Settings > Quick Setup
search engine
Use Your Extender as an Access Point
to configure your extender.
Access Point Mode
TP-Link_Extender or TP-Link_
and
37