Register A Tp-Link Id; Change Your Tp-Link Id Information - TP-Link RE230 User Manual

Chapter 4
4 1
When you log in after initial setup, the web page will ask whether you need TP-Link
Cloud service. You can also access the TP-Link Cloud settings as follows:
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to
3. Click
to log in to the extender for the first time will be automatically bound as an Admin.
Notes:
• To learn more about the
• Once you have registered a TP-Link ID on the web management page, you can only register another TP-
Link ID via the Tether APP. Please refer to
app and register a new one.
• If you want to unbind the admin TP-Link ID from your extender, please go to
click Unbind
4 2
Follow the steps below to change your email address and password of your TP-Link ID
as needed.
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to
• To change your email address:
1. Click
2. Enter the password of your TP-Link ID, then a new email address. And click Save.
Downloaded from ManualsNet.com

Register a TP-Link ID

Settings > TP-Link Cloud.
Sign Up and follow the instructions to register a TP-Link ID. The TP-Link ID used
Admin and
in the Device Information

Change Your TP-Link ID Information

Settings > TP-Link Cloud, and focus on the
behind the Email.
search engine
User TP-Link ID, refer to Manage the User TP-Link
Manage the Extender via the TP-Link Tether App
section.
Account Information
TP-Link Cloud Service
IDs.
to install the
Settings > TP-Link Cloud, an
section.
22