Led Explanation; Port And Button Description - TP-Link TL-WA855RE User Manual

Chapter 1
1. 2. 1.

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
Signal
Power
1. 2. 2.

Port and Button Description

Ports or Buttons
WPS Button
Reset (Hole)
Ethernet Port
Status
The extender is connected to your router's wireless network
Blue
and is in a suitable location.
The extender is experiencing poor signal strength. Try
Red
relocating it closer to your router.
Flashing WPS connection is being established.
Off No wireless connection has been established.
On The extender is on.
Flashing The system is starting up or firmware is being upgraded.
Off The extender is off.
Press the WPS button on your host router, and immediately press the WPS
button on the extender. The Signal LED of the extender should change to solid
blue, indicating successful WPS connection.
Use a pin to press and hold the Reset button to reset the extender.
Connect your Ethernet-only device to the Ethernet port of the extender to join
the Wi-Fi network.
Get to Know About Your Extender
Indication
Description
4