Table of Contents
Advertisement
Security Target
Version 1.1
2022-03-08
computer attached to its corresponding port has a USB CAC reader cable connected and CAC function is
enabled (although the computer is not selected). If the CAC LED flashes when the corresponding port is
selected, this indicates a non-qualified USB smart card/CAC reader is connected.
The TOE has a reset button that resets the switch to the default settings when pressed. The switch is then
powered up and behaves as described above.
The CAC reader function on each Port can be enabled or disabled by pressing the Port Selection Push
button for more than 3 seconds (this is a toggle feature).
48
Advertisement
Table of Contents
