ATEN CS1182DP4C Manual page 31

Security Target
5.2.2.18 Residual Information Protection (Keyboard Data) (FDP_RIP.1/KM)
FDP_RIP.1.1/KM
5.2.2.19 Residual Information Protection (FDP_RIP_EXT.1)
FDP_RIP_EXT.1.1
5.2.2.20 Purge of Residual Information (FDP_RIP_EXT.2)
FDP_RIP_EXT.2.1
5.2.2.21 PSD Switching (FDP_SWI_EXT.1)
FDP_SWI_EXT.1.1
5.2.2.22 PSD Switching Methods (FDP_SWI_EXT.2)
FDP_SWI_EXT.2.1
FDP_SWI_EXT.2.2
5.2.2.23 Tied Switching (FDP_SWI_EXT.3)
FDP_SWI_EXT.3.1
5.2.2.24 Session Termination (FDP_TER_EXT.1)
FDP_TER_EXT.1.1
5.2.2.25 Session Termination of Removed Devices (FDP_TER_EXT.2)
FDP_TER_EXT.2.1
5.2.2.26 Session Termination upon Switching (FDP_TER_EXT.3)
FDP_TER_EXT.3.1
FDP_TER_EXT.3.2
The TSF shall ensure that any keyboard data in volatile memory is purged upon
switching computers.
The TSF shall ensure that no user data is written to TOE non‐volatile memory or
storage.
The TOE shall have a purge memory or restore factory defaults function
accessible to the administrator to delete all TOE stored configuration and
settings except for logging.
The TSF shall ensure that [switching can be initiated only through express user
action].
The TSF shall ensure that no switching can be initiated through automatic port
scanning, control through a connected computer, or control through keyboard
shortcuts.
The TSF shall ensure that switching can be initiated only through express user
action using [console buttons, wired remote control].
The TSF shall ensure that [connected keyboard and mouse peripheral devices]
are always switched together to the same connected computer.
The TSF shall terminate an open session upon removal of the authentication
element.
The TSF shall terminate an open session upon removal of the user
authentication device.
The TSF shall terminate an open session upon switching to a different computer.
The TSF shall reset the power to the user authentication device for at least one
second upon switching to a different computer.
26
Version 1.1
2022-03-08