Yamaha TTR 125 2020 Owner's Manual page 26

Instrument and control functions
3. Tighten the locknut to the speci-
fied torque. NOTICE: Always
tighten the locknut against the
adjusting nut, and then tighten
the locknut to the specified
torque.
[ECA11242]
4 Tightening torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
Rebound damping force
Turn the adjusting dial in direction (a) to
increase the rebound damping force.
Turn the adjusting dial in direction (b) to
decrease the rebound damping force.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)
Standard:
12 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
TIP
 When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.
 When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
4-9
tions, however such adjustments
are ineffective and may damage
the suspension.
Compression damping force
Turn the adjusting knob in direction (a)
to increase the compression damping
force.
Turn the adjusting knob in direction (b)
to decrease the compression damping
force.
To set the compression damping
force, turn the adjuster in direction (a)
until it stops, and then count the clicks
in direction (b).
1. Compression damping force adjusting knob