Clutch Lever; Shift Pedal - Yamaha TTR 125 2020 Owner's Manual

Engine stop button "ENGINE STOP"
Hold this button pushed until the en-
gine stops in case of an emergency,
such as when the vehicle overturns or
when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter. See page 6-2 for start-
ing instructions prior to starting the en-
gine.
EAU12672

Clutch lever

EAU12713
1. Clutch lever
The clutch lever is located on the left
side of the handlebar. To disengage
the clutch, pull the lever toward the
handlebar grip. To engage the clutch,
release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the start-
ing circuit cut-off system. (See page
4-11.)
Instrument and control functions
EAU31642

Shift pedal

1. Shift pedal
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
pedal down. (See page 6-3.)
4-2
EAU12876
4