Bulk Exchange (Ultrium 960 And Ultrium 448 Only); Loading Tape Cartridges - HP StorageWorks Ultrium 960 User's And Service Manual

1/8 tape autoloader
Hide thumbs Also See for StorageWorks Ultrium 960:
Table of Contents

Advertisement

3.
Press + or - until the desired slot number displays on the LCD screen and press Enter. You are not
given the option to export from an empty slot, and you cannot export directly from the drive.
When Remove Cartridge displays on the LCD screen and the cartridge is ejected through the
mailslot, remove the exported cartridge from the autoloader and press Enter. (See
4.
Repeat steps 3 and 4 as needed for any additional cartridges.
5.
Press Cancel when you have finished exporting cartridges.
6.
Check the LCD screen to verify that the desired slots no longer contain cartridges.
Figure 14
Exporting a cartridge

Bulk Exchange (Ultrium 960 and Ultrium 448 only)

This option allows you to import or export a specific number of cartridges and is useful if you want
to exchange a complete set of cartridges. Bulk Exchange operation starts with slot #1. If a cartridge
is available this cartridge will be exported. You must then import a new cartridge or move to the
next slot #2. The procedure is repeated for slot #2 to slot #8.
NOTE:
You must go offline to run Bulk Exchange and Import from the Commands menu. See
access Offline

Loading tape cartridges

This option loads a cartridge from the autoloader slots into the tape drive. To use this option:
1.
Ultrium 960 and Ultrium 448: From the Home Screen, press + or - until Go Offline displays
on the top line of the LCD screen. Press Enter to select. Press + or - until Commands displays on
the top line of the LCD screen. Press Enter to select.
All other models: From the Home Screen or Main menu, press + or - until Commands displays on
the top line of the LCD screen. Press Enter to select.
2.
Press + or - until Load Cartridge displays on the LCD screen. Press Enter to select.
3.
Press + or - until the desired slot number displays on the LCD screen and press Enter. The slot
number you select indicates the cartridge to be loaded into the tape drive.
NOTE:
Only slot numbers containing cartridges are displayed.
mode" on page 26.
Ultrium 960, Ultrium 448, Ultrium 460, Ultrium 230, DLT VS80, SDLT 320
Figure
14.)
"To
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents