Using A Wired Remote Control - Panasonic PT-D5500E Operating Instructions Manual

Using the remote control unit

Using a wired remote control

When multiple main units are connected in the system, connect the units with the supplied remote control cable
to simultaneously control the multiple main units with a single remote control unit through the REMOTE1
IN/OUT terminal. It is effective to use the wired remote control in the environment in which an obstacle stands in
the light path or where devices are susceptible to outside light.
16
R/P G/Y
R
S-VIDEO IN
VIDEO IN RGB 1 IN
REMOTE 1 REMOTE 2 IN
IN OUT
Remote control cable
(supplied)
B/P
B
Connect to the
secondary projector