Specifications - Panasonic PT-D5500E Operating Instructions Manual

Dlp based projector for commercial use
Hide thumbs Also See for PT-D5500E:
Table of Contents

Advertisement

Specifications

Model No.
Power supply
Power consumption
DLP
panel
TM
Panel size
Display system
Number of pixels
Lens
Powered zoom
Powered focus control
Projection lamp
Optical output
Applicable scanning frequency
For video signal (S-video included)
For RGB signal
For DVI-D signal
For YP
P
signal
B
R
Colour system
Screen size
Screen aspect ratio
Projection scheme
Contrast ratio
Interface ports
RGB1 input terminal
These values are for the lens provided with the PT-D5500E. Note that these values change according to the
1
lens used.
54
PT-D5500E
AC 220 - 240~ V, 50 Hz/60 Hz
750 W (about 15 W in standby without fan running)
0.7 inch (aspect ratio 4:3)
DMD
TM
element, DLP type
786 432 pixels (1 024 x 768 dots)
1 to 1.36
F=1.7 to 2.0 f=25.6 to 33.8
2 bulbs x 300 W UHM lamp
5 000 lm
1
Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz
Horizontally 15 kHz–91 kHz, vertically 50 kHz–85 kHz,
Panasonic Intelligent Auto Scanning (PIAS) system
Dot clock frequency Less than 108 MHz
VGA–SXGA Dot clock frequency 108 MHz or less
[480i], horizontally 15.73 kHz, vertically 59.94 Hz
[480p], horizontally 31.5 kHz, vertically 59.94 Hz
[576i], horizontally 15.63 kHz, vertically 50 Hz
[576p], horizontally 31.25 kHz, vertically 50 Hz
[720/60p], horizontally 45 kHz, vertically 60 Hz
[1035/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/60i], horizontally 33.75 kHz, vertically 60 Hz
[1080/50i], horizontally 28.13 kHz, vertically 50 Hz
• HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60)
50 inch–600 inch
4:3
Menu-selectable from front/rear/ceiling mount, and floor standing
1 600:1 (when "HIGH" is selected as the "CONTRAST MODE" setting)
1 set, BNC x 5
[For YP
P
input]
B
R
Y: 1.0 V[p-p] synchronization signal included,
P
P
: 0.7 V[p-p] 75
For G-SYNC: 1.0 V[p-p] 75
B
R
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically
adjusted
• However, HD/SYNC, and VD terminals are not compliant with 3-value
direct SYNC.
PT-D5500EL
Option

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-d5500el

Table of Contents