Adjusting The Picture; Picture Mode; Bright; Contrast - Panasonic PT-D5500E Operating Instructions Manual

Adjusting the picture

• For RGB/DVI signals only
PICTURE

PICTURE MODE

GRAPHIC

BRIGHT

32

CONTRAST

32

COLOR TEMP.

DEFAULT
SHARPNESS 06
AI ON
SYSTEM
RGB
SELECT ADJ RETRN
• For S-Video/Video/YP P
B
PICTURE
PICTURE MODE STANDARD
BRIGHT 32
CONTRAST 32

COLOR

32

TINT

32
COLOR TEMP.
DEFAULT
SHARPNESS
06
NR ON
AI ON
TV-SYSTEM AUTO1
SELECT ADJ RETRN
PICTURE MODE
The picture mode can be selected from the
following depending on viewing conditions and the
video signal source in use:
DYNAMIC : Picture brightness/contrast ratio is
increased to suit brighter viewing
environments.
GRAPHIC : The picture becomes suitable for
input from to the personal
computer.
STANDARD : The picture becomes suitable for
moving images in general.
CINEMA : The picture becomes suitable for
movie sources.
NATURAL : The picture becomes suitable for
use in a dark room.
BRIGHT
"BRIGHT" is used to adjust the black level
(brightness).
: Raises the picture brightness.
: Lowers the picture brightness.
CONTRAST
"CONTRAST" is used to adjust the contrast ratio.
: Raises the contrast ratio.
: Lowers the contrast ratio.
signals only
R
COLOR
(For S-Video/Video/YP P
B
: Deepens colours.
: Weakens colours.
TINT
(For S-Video/Video/YP P
B
"TINT" is used to adjust human skin.
: Adjusts skin tone toward greenish colour.
: Adjusts skin tone toward reddish-purple.
COLOR TEMP.
The colour temperature is adjusted when the white
areas of images take on a reddish or bluish hue.
DEFAULT: Standard setting
HIGH : The white areas take on a more
bluish-white hue.
MIDDLE : The white areas take on a slightly
reddish hue.
USER : The RGB values of the white balance
are set separately.
Press the ENTER button, select "W-
BAL HIGH" or "W-BAL LOW", and
proceed with the detailed settings.
: The colours of the selected
item are darkened.
: The colours of the selected
item are lightened.
signals only)
R
signals only)
R
29