How To Manually Pair - Jabra ENHANCE PLUS User Manual

HOW TO MANUALLY PAIR

Follow the steps below if you need to pair the earbuds to a
second iPhone, or if they have been unpaired from your
first iPhone. If you are pairing for the first time, please
follow the instructions on page 8.
STEP 1/5 Remove the earbuds from the charging case to
power them on. The LEDs will light up green.
16
STEP 2/5 Press and hold (3 secs) both the left and the
right earbud buttons simultaneously. Do not
hold the buttons for longer than 6 seconds.
When you release the buttons, the LEDs will
flash blue to indicate the earbuds are ready to
pair to your iPhone.
STEP 3/5 On your iPhone, open 'Settings > Accessibility
> Hearing Devices'.
3 sec
17