Advertisement
The earbuds are worn with the cable behind the neck and the earhooks behind each ear.
To charge the earbuds, connect a USB charging cable to the USB charging port on the left earbud. It is recommended to charge the earbuds using the supplied Jabra charging cable, however it is possible to charge the earbuds using a compatible charger.
It takes approx. 2 hours to fully charge the battery. If the earbuds are fully out of battery, 15 minutes of charging will give 1 hour of battery.
Note: Always clean and dry the USB charging port before charging the earbuds. It is recommended to recharge the earbuds at least once a month.
On: Press and hold (1 sec) the Multi-function button. The LED will flash green and you will hear a power on tone.
Off: Press and hold (3 sec) the Multi-function button. The LED will flash red and you will hear a power off tone.
Right | Calls & music | |
Power on | Press and hold (1 sec) the Multi-function button | |
Power off | Press and hold (3 sec) the Multi-function button | |
Play/pause music | Press and hold (1 sec) the Multi-function button | |
Answer/end call | Press the Multi-function button | |
Reject call | Double-press the Multi-function button | |
Adjust volume | Press the Volume up or Volume down button, when listening to music or on a call | |
Next track | Press and hold (1 sec) the Volume up button (smartphone only) | |
Restart track | Press and hold (1 sec) the Volume down button to restart the current track. Press and hold twice to play the previous track. | |
Hear battery and connection status | Press the Volume up or Volume down button, when not listening to music or on a call | |
Left | Calls & music | |
Activate Siri, Google Assistant or Amazon Alexa (phone dependent) | Press the Voice button, when not on a call | |
Mute/un-mute microphone | Press the Voice button, when on a call |
The Jabra Elite Active 45e enables you to speak to Siri or Google Assistant on your smartphone using the Voice button.
Left | Voice Assistant | |
Activate Siri, Google Assistant or Amazon Alexa (phone dependent) | Press the Voice button, when not on a call |
The earbuds can answer or reject calls when you are already on a call.
Right | Multiple call handling | ||
End current call and answer incoming call | Press the Multi-function button | ||
Put current call on hold and answer incoming call | Hold (1 sec) the Multi-function button | ||
Switch between held call and active call | Hold (1 sec) the Multi-function button | ||
Reject incoming call, when on a call | Double-tap the Multi-function button |
Voice guidance are announcements intended to guide you, or give you earbud status updates (e.g. connection and battery status).
Voice guidance is enabled by default.
Left | Voice Guidance | |
Turn Voice guidance on/off | Hold (5 sec) the Voice button until you hear an announcement in the earbuds |
Alternatively, use Jabra Sound+ on your smartphone to turn Voice guidance on or off.
Resetting the earbuds clears the list of paired devices and all earbud settings.
Right | Reset | |
Reset the pairing list | Ensure the earbuds are powered on and you are not on a call. Then simultaneously hold (5 sec) the Volume up button and the Multifunction button until the LED lights up purple. You will then need to re-pair the earbuds. |
Firmware updates improve performance, or add new functionality to Jabra devices.
Download Jabra Sound+ for firmware updates.
Jabra Sound+
Customize your music
Manage voice prompts
Register your 2-year warranty
View the FAQs on Jabra.com/help/eliteactive45e
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Jabra Elite Active 45e - Wireless Headphones Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Elite Active 45e that isn't answered in the manual? Leave your question here.