Installation; Cover - Sony PCSA-CHG90 Operating Instructions Manual

Installation

Removing/Attaching the Cable Cover
Note
Do not use an electric screwdriver when removing or attaching the cable cover. Doing
so may damage the thread of the attachment screws.
To remove the cable cover
The cable cover is attached to the Camera Unit at the factory. You can remove
it if necessary, for example, when connecting or disconnecting cables.
1
Release the two screws on the cable cover.
2
Hold the lower ends of the cable cover and pull it toward you.
14
GB
Installation
VISCA RS-422
1 2 3 4 5 6 7 8 9
DC IN 12V
VISCA RS-232C OUT
MONITOR HD-SDI
HFBK-HD1
VISCA RS-422
1 2 3 4 5 6 7 8 9
DC IN 12V
VISCA RS-232C OUT
MONITOR HD-SDI
HFBK-HD1