Olympus DP80 Instructions Manual page 10

PC and Software
CAUTION
The PC data may be destroyed by an unexpected event. Be sure to keep a backup of the data.
1. Olympus will not assume any liabilities for any damage incurred due to the use or non-usability of this system,
including compensation for the lost data.
2. The PC used with this system should set up and run Microsoft Windows 7 Professional or Ultimate.
For the OS in the PC, the user is requested to create a backup and retain it carefully. (Olympus does not support the
matters related to the OS including its backup.)
For details on the PC and Microsoft Windows 7, refer to their respective manuals.
3. Olympus guarantees the quality of this product in the factory shipment condition.
Olympus will not assume any liabilities for operation errors and functional faults incurred due to the alteration of the
environmental setup (including BIOS change), installation of other software or addition of hardware to the PC by the
user.
4. When the HDD free space reduces, the data processing speed may slow extremely or errors may occur frequently.
To prevent this, delete unnecessary data files frequently. For how to delete data files, refer to the manuals for Microsoft
Windows 7.
5. Never attempt to delete or rename the folders and files installed by the provided installer software. Otherwise, the
software may get unable to be started up.
6. Do not open the housing of the PC and touch the power supply or the circuit board's heat generating section right
after use as it may burn your hand. Wait until the internal temperature drops sufficiently.
7. Sharp edges inside the PC may cut your fingers, so take extra care.
8. Use a PC that complies with the safety standards of your country.
6