Installing The Pcie Interface Board - Olympus DP80 Instructions Manual

1
a
b
22
2
CAUTION
2
3
c
e
4
d

Installing the PCIe Interface Board

• Before installing the PCIe interface board in the PC, be sure to
read the instruction manual for the PC in order not to damage
it.
• Be sure to turn off the PC and peripherals and unplug their
power cords before installing the PCIe interface board.
• To avoid damage due to static electricity, touch an unpainted
metallic surface of the PC with your hand to discharge the
static electricity before installation.
• The SATA-to-HDD (4-pin) power conversion adapter is sensitive
to excessive force. Please handle it with care.
• Be careful not to cut your fingers at sharp parts within the PC.
1
Open the housing of the desktop PC.
} For removing the cover, refer to the Instruction Manual of the PC.
2
Remove the slot cover a of an unused PCIe slot on the motherboard.
3
Insert the PCIe interface board
PC carefully without touching the board surface directly by hand.
4
Connect the FDD power cable
power connector on the PCIe interface board
e
to the connector c of the desktop
b
from the PC's power supply to the
d
b .