Table of Contents
Advertisement
Attaching / Detaching (Continued)
Do not touch the switches of this product and the removed DC motor unit be-
cause there is a risk of damaging them.
Detaching the DC motor unit
6-ENGLISH
Retaining
screw
Retaining
screw
Fixing screw
(M3 x 10 mm)
Cover
Attention
z Check that the retaining screw
does not protrude over a gear. If
it does protrude over a gear as
shown in the figure, you will not
be able to detach the DC motor
unit.
In that case, attach the lens to the
projector and perform the zoom
operation to move the position of
the retaining screw.
1)
Remove the one fixing
screw (M3 x 10 mm) from
the cover.
Attention
z Screw locking agent is applied to
the screw. Take care that it does
not enter in between gears during
removal.
Advertisement
Table of Contents
