Panasonic ET-PKB50 Product Specifications

S P E C F I L E
Ceiling mount bracket
Description
This ceiling mount bracket is to be used when mounting LCD projectors to the ceiling.

Specifications

Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W x H x D):
Weight:
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . . . . . . . . . . . . .1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety fitting
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
Dimensions
Illustration shows the projector attached to the projector.
Attachment plate Attachment plate
93.5 93.5
(3-11/16˝) (3-11/16˝)
as of March 2006
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
ø49 ø49
(1-15/16˝) (1-15/16˝)
ø43 ø43
(1-11/16˝) (1-11/16˝)
Projector Projector
70 (2-12/16˝) 70 (2-12/16˝)
+5°, -20°
±10°
±5°
296 x 296– 376 x 215 mm
(11-21/32˝ x 11-21/32˝–14-13/16˝ x 8˝-15/32˝)
2.3 kg (5.1 lbs)
Washer-fitted hexagonal bolts (M6 x 12) . . . . . . .19
Washer-fitted screws (M4 x 8) . . . . . . . . . . . . . . . .4
Washer-fitted screws (M4 x 12) . . . . . . . . . . . . . . .4
Wire rope
Flat wire clip
Clamp tube
Attachment plate
Ø8.5 (11/32˝)
ET-PKB50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Ø9.5 (3/8˝) Ø9.5 (3/8˝)
Ø8.5 (11/32˝)
110 (4-11/32˝) 110 (4-11/32˝)
140 (5-/12˝) 140 (5-/12˝)
160 (6-5/16˝) 160 (6-5/16˝)
unit: mm (inch)
Note: This illustration is not drawn to scale.
1