Accessing The Menus; End User Menu Parameters - Rinnai aiM 65 User And Installation Manual

Accessing The Menus

It is possible to set the operation of the boiler or the cascade
system via the front panel of the boiler.
There are four user levels of boiler programming,each of
which allows different settings:
End User Menu: allows the management of most part of
•
the parameters to ensure correct operation of the plant;
Commissioning menu: used by personnel specialized,
•
allows the configuration of multiple parameters specific;
Specialist Menu: used only by Rinnai authorised service
•
technicians, allows the configuration of some functions
details (historical errors, gas conversion, displacement
climatic curve, DHW setting);
OEM menu: dedicated to the factory setting of the device,
•
to access it it is necessary to insert it of a password.
Parameter setting
From the main screen (screen from which the boiler
temperature or cascade temperature is visible):
press the "Ok" key and then the info key for 6 seconds;
•
turn the central knob on the control panel e select the
•
Menu;
Confirm the choice with the "Ok" button;
•
Turn the knob to scroll through the categories of available
•
parameters;
Press the "Ok" key to confirm;
•
Turn the knob to scroll the parameter from edit or view;
•
Press the "Ok" key to confirm;
•
Turn the knob to change the parameter value
•
Press the "Ok" button to confirm.
•
Some of these parameters may not be visible either there are
additional parameters. This depends on the accessories that
are connected to the device (for example pumps, sensors,
cascade of luminaires and external modules).
To exit this display mode is sufficient press the ESC key. If
no further is made changes or select other functions within 8
minutes on display will show the standard display again.
34
Requirements and conditions

End user menu parameters

End user menu parameters
Description
Time and date
Control unit
Time program heating circuit 1
Time program heating circuit 2
Time program 3 / HC
Time program 4 / DHW
Time program 5
Holidays CR 1
Holidays CR 2
Holidays CR 3
Heating circuit 1
Heating circuit 2
Heating circuit 3
Domestic Hot Water (DHW)
Boiler
Fault
Operation Maintenance Service
Boiler diagnostics parameters
User diagnostics
Accessing The Menus
Parameter Selection
1 Hours / Minutes
2 Month / Day
3 Year
20 Language
500-516 Preselection, Periods
520-536 Preselection, Periods
540-556 Preselection, Periods
560-576 Preselection, Periods
600-616 Preselection, Periods
641-648 Periods, Start-End
651-658 Periods, Start-End
661-668 Periods, Start-End
710 Comfort
712 Reduced
714 Frost protection
720 Climate curve
730 Summer / winter limit value
1010 Comfort
1012 Reduced
1014 Frost protection
1020 Climate curve
1030 Summer / winter limit value
1310 Comfort
1312 Reduced
1314 Frost protection
1320 Climate curve
1330 Summer / winter limit value
1610 DHW storage temperature
2214 Manual control setpoint
6705 Error diagnostics
7130 Chimney sweep function
7131 Burner power
7140 Manual operation
8338 Burner operating hours
8527 Tot. En. solar sold
8530 Solar operating hours
8700 External temperature
8701 Minimum outside temperature
8702 Maximum outside temperature