Panasonic DP-2500/3000 Operating Instructions Manual page 66

BASIC OPERATIONS
Sending Documents
Redialling
Automatic Redialling
If a busy line is detected, the machine will redial the number up to 3
times at 3 minute interval. However, if a busy line is not detected, the
machine will redial only one time. During that time, a message will
appear as shown to the right.
A file number is shown in the upper right hand corner of the display if it
is a memory transmission file.
Manual Redialling
You can also redial the last dialled number manually by pressing
1
2
Make sure that "MEMORY XMT" is displayed, if
"DIRECT XMT" appears, press
change to Memory Transmission.
3
4
The document(s) are stored into memory with a file
number. Then the machine dials the last dialled
number.
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press
64
(see Note 1)
Set original(s) face down.
XMT MODE
REDIAL
to
XMT MODE
REDIAL
MEMORY XMT NO.014
WAIT TO DIAL
SALES DEPT
AMERICA ASIA CHINA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
MEMORY XMT
JOB
STATUS LIGHTER DARKER
XMT MODE ORIGINAL
key.
MEMORY XMT STN(S):0000
9 555 1234_
AMERICA ASIA CHINA
AFRICA BERLIN
ANTARCTICA BRAZIL
APOLLO CANADA
MEMORY XMT
JOB
STATUS LIGHTER DARKER
XMT MODE ORIGINAL
to start redialling immediately.
1/1
1/1