Table of Contents
Advertisement
Basic Transmission Settings
Original (Text/Photo)
The Original setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to "TEXT". You can select either "TEXT/PHOTO" or "PHOTO" mode.
TEXT/PHOTO
PHOTO
Verification Stamp
(see Note 1) (see Note 2)
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
You can temporarily change the stamp setting to either "Off" or "On" by using the Select Mode (
SELECT MODE 01 STAMP
NOTE
1. When you store document(s) into memory, the Verification Stamp will stamp on the original if it is successfully
stored into memory. In this case the Verification Stamp is not a confirmation that the document was successfully
transmitted. If you wish to disable the use of the Verification Stamp when storing document(s) into memory,
change the setting of Fax Parameter No. 028. (See page 34)
2. To change the preset Verification Stamp setting, change the Fax Parameter No. 004. (See page 33)
for text only originals
TEXT
for text and photo originals
for photo or illustration originals
mark.
).
BASIC OPERATIONS
FUNCTION
39
Advertisement
Table of Contents
