Fax Parameter Table - Panasonic DP-2500/3000 Operating Instructions Manual

Customizing Your Machine

Fax Parameter Table

No. Parameter
001 CONTRAST
002 RESOLUTION
003 ORIGINAL
004 STAMP
005 MEMORY
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
010 KEY/BUZZER VOLUME
012 COMM. JOURNAL
013 AUTO JOURNAL PRINT
014 FILE ACCEPTANCE
REPORT
Setting
Setting
Number
1 Lighter Setting the home position for the CONTRAST.
4 Normal
7 Darker
1 Standard Setting the home position for the RESOLUTION.
2 Fine
3 S-Fine
1 TEXT Setting the home position for the ORIGINAL.
2 TEXT/PHOTO
3 PHOTO
1 Off Setting the home position of the STAMP .
To select the stamp function when the document is stored in
2 On
memory, see Fax Parameter No. 28.
1 Off Setting the home position for the MEMORY.
2 On
1 Inside Selecting the printing position of the header.
Inside
2 Outside
Outside : Outside TX copy area.
No print : Header is not printed.
3 No print
1 Logo, ID No. Selecting the header format.
2 From To
1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
2 Valid
bottom of each received document.
1 Off Selecting the volume of the Key/Buzzer tone.
2 Soft
3 Medium
4 Loud
1 Off Selecting the home position for the printing mode of the COMM.
Journal Off/Always/INC.
2 Always Off
Always : Always prints
3 Inc. Only Inc. Only: When communication has failed.
1 Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
2 Valid
1 Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a report will print after the
2 Valid
document is stored into memory.
PROGRAMMING YOUR MACHINE
Comments
: Inside TX copy area.
: Does not print
33