Panasonic DP-2500/3000 Operating Instructions Manual page 36

PROGRAMMING YOUR MACHINE
Customizing Your Machine
No. Parameter
017 RECEIVE MODE
022 SUBSTITUTE RCV
024 PRINT REDUCTION
025 REDUCTION RATIO
026 POLLING PASSWORD
027 POLLED FILE SAVE
028 STAMP AT MEM. XMT
031 INCOMPLETE FILE
033 XMT REDUCTION
037 RCV TO MEMORY
042 CONF. POLLED FILE
043 PASSWORD-XMT
044 PASSWORD-RCV
046 SELECT RCV
052 DIAGNOSTIC
PASSWORD
34
Setting
Number
1
2
1
2
1
2
70
----
100
1
2
1
2
1
SAVE
2
1
2
1
SAVE
2
1
2
1
2
1
2
Setting
Manual Setting the reception mode to automatic or manual.
Auto
Invalid Selecting whether the machine receives to memory when the
recording paper runs out, toner runs out or the recording paper is
Valid jammed.
Fixed Selecting the print reduction mode.
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto
Auto: Reduce received document according to the length of
received originals.
70% Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected
----
on Fax Parameter No. 24.
100%
(----) Setting a 4-digit password for secured polling. (See page 77)
Invalid Selecting whether the machine retains the polled document(s) in
memory even after the document(s) is polled once.
Valid
Invalid Selecting whether the machine stamps the originals when storing
into memory.
Valid
(depending on the Stamp setting on the Control Panel)
Invalid Selecting whether the machine retains the document in memory if
it is not successfully transmitted.
Valid
Invalid Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
Valid
receiving machine.
Enter a 4-digit password for printing the received document(s) in
memory by using
(----)
06 RCV TO MEMORY
When
06 RCV TO MEMORY
is not selectable on the LCD display. (See page 104)
Invalid Selecting whether the machine saves the confidential polled file
even after the file is polled once.
Valid
Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
On
station when transmitting. (See page 128)
Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
On
transmitting station when receiving. (See page 130)
Invalid Selecting whether the machine performs selective reception. (See
page 125)
Valid
Setting the password for Remote Diagnostic Mode. Please ask
(----)
your Panasonic Authorized Dealer for details.
Comments
SELECT MODE
FUNCTION
.
is set to ON, this parameter