Panasonic HDC27H Operating Instructions Manual page 122

Setting menu screens
TC/UB screen
The time code and user bits settings are performed on
this screen.
Variable
Item
range
P. OFF LCD ON USER
DISPLAY OFF ENG
C U F
TC OUT TCG USER
TCG/TCR ENG
C U F
The underlining in the variable range column indicates the setting in
the preset mode.
122
VTR MAIN MENU (continued)
VF
Remarks
display
For setting whether the
LCD display is to appear
when the power is OFF.
ON : The LCD display
appears even when
the power is OFF.
OFF : The LCD display
does not appear
when the power is
OFF.
The power-saving mode is
established.
For selecting the time
code which is to be output
to the time code output
connector.
TCG:
The time code generated
by the time code
generator is output at all
times.
TCG/TCR:
The time code generated
by the time code
generator is output in the
E-E mode; the time code
reader value is output in
the V-V mode.
Variable
Item
range display
VITC UB MODE USER USER
DATE ENG
TIME
EXT
TCG
C U F
TC DISP SEL 24F USER
25F ENG
30F
C U F
VF
Remarks
For setting what is to be
written as the user bits in
the VITC area.
USER : User setting (fixed).
DATE : Real time value for
year/month/day/
hours.
TIME : Real time value for
hours/minutes/
seconds.
EXT : The UBG value is
slave-locked when
a TC signal is
supplied from an
external source.
(The user setting is
used when no
external input is
supplied.)
TCG : Time code
generator value
<Notes>
O Set the time on the
TIME/DATE menu
screen when using the
UB MODE item with
real-time operation.
OThe tape management
information is not
output as the user bits
information in the
VITC area.
For setting the number of
frames to be displayed per
second in the time code
frame digits.
24F: 0 to 23 frames will be
displayed per second.
25F: 0 to 24 frames will be
displayed per second.
30F: 0 to 29 frames will be
displayed per second.