Vf Marker Screen; Vf Indicator Screen - Panasonic AJ-HDC27HP Menu Information

Setting menu screens

VF MARKER screen

The information to be displayed inside the viewfinder
is set on this screen.
Variable
Item
range display
SAFETY ZONE OFF USER
1 ENG
:
3
:
12
S C U F E
CENTER MARK ON USER
OFF ENG
S C U F E
FRAME SIG 4 : 3 USER
13 : 9 ENG
14 : 9
VISTA
CNSCO
S C U F E
MARK ON USER
OFF ENG
S C U F E
LVL 00 USER
: ENG
15
S C U F E
The underlining in the variable range column indicates the setting in
the preset mode.
FILM (CAM) MAIN MENU 2 (continued)
VF
Remarks
For selecting the safety
zone display.
1 : 80% and 90% corner
display
2 : 80% corner display
3 : 90% corner display
4 : 80% and 90% box
display
5 : 80% box display
6 : 90% box display
7 : 80% and 90% corner
display in 4:3 mode
8 : 80% corner display in
4:3 mode
9 : 90% corner display in
4:3 mode
10 : 80% and 90% box
display in 4:3 mode
11 : 80% box display in
4:3 mode
12 : 90% box display in
4:3 mode
For setting the center
marker display to ON or
OFF.
For selecting the frame
marker display.
(VISTA = 1 : 1.85)
(CNSCO = 1 : 2.35)
For setting the frame
marker display to ON or
OFF.
For setting the picture
levels on the outside of
the frame marker.

VF INDICATOR screen

The information to be displayed inside the viewfinder
is set on this screen.
Variable
Item
range display
EXTENDER ON USER
OFF ENG
S C U F E
SHUTTER ON USER
OFF ENG
S C U F E
FILTER ON USER
OFF ENG
S C U F E
WHITE ON USER
OFF ENG
S C U F E
GAIN ON USER
OFF ENG
S C U F E
IRIS S USER
IRIS ENG
S+IRIS
OFF
S C U F E
CAMERA ID ON USER
OFF ENG
S C U F E
ZOOM LVL ON USER
OFF ENG
S C U F E
COLOR TEMP ON USER
OFF ENG
S C U F E
FRAME RATE ON USER
OFF ENG
S C U F E
VERSION ID ON USER
(FILM MENU) OFF ENG
S C U F E
VF
Remarks
For setting the extender
display to ON or OFF.
For setting the shutter
speed display to ON or
OFF.
For setting the filter No.
display to ON or OFF.
For setting the AWB
PRE/A/B display to ON or
OFF.
For setting the currently
selected gain display to
ON or OFF.
S: Only the super iris ON
status is displayed.
IRIS: Only the aperture
value is displayed.
S+IRIS: Both the super iris
ON status and the
aperture value are
displayed.
OFF: Neither the super iris
ON status nor the
aperture value is
displayed.
For setting the ID display
during color bar
displaying.
For setting the zoom
position value display to
ON or OFF.
For setting the color
temperature display to ON
or OFF.
For setting the frame rate
display to ON or OFF.
For displaying the gamma
curve used when the
internal color bar signal
recording mode is
established.
101