Vf Display Screen - Panasonic AJ-HDC27HP Menu Information

Setting menu screens

VF DISPLAY screen

The information to be displayed inside the viewfinder
is set on this screen.
Variable
Item
range display
DISP NORMAL USER
CONDITION HOLD ENG
S C U F E
DISP MODE 1 USER
2 ENG
3
S C U F E
VF OUT Y USER
NAM ENG
R
G
B
S C U F E
VF DTL 0 USER
: ENG
4
5
S C U F E
ZEBRA1 000% USER
DETECT : ENG
(CAM MENU) 070%
:
(FILM MENU) 080%
:
109%
S C U F E
ZEBRA2 000% USER
DETECT : ENG
085%
:
109%
S C U F E
ZEBRA2 ON USER
OFF ENG
SPOT
S C U F E
The underlining in the variable range column indicates the setting in
the preset mode.
100
VF
Remarks
NORMAL:
The statuses are
displayed at all times.
HOLD:
The statuses are
displayed when MODE
CHECK SW is ON.
Display
Change
1 2
t t ±
FILTER
t t ±
GAIN
t t ±
AWB
t ± ±
AUTO KNEE SW
t ± ±
SHUTTER
t ± ±
ABB STATUS
t ± ±
AWB STATUS
For selecting VF OUT.
NAM (N Additive Mix):
The signal with the highest
level among the R, G and
B signals is output.
For selecting VF DTL.
The detail of the signals
for VF is further boosted.
At the "0" setting, the
detail is the same as the
unit's.
For setting the ZEBRA1
detection level (IRE level).
For setting the ZEBRA2
detection level (IRE level).
For setting ZEBRA2 to ON
or OFF and selecting
SPOT. See "Zebra
pattern display."
<Note>
When used at the "SPOT"
setting, ensure that the
ZEBRA2 DETECT value is
set higher than the
ZEBRA1 DETECT value.
If the ZEBRA2 DETECT
value is lower than the
ZEBRA1 DETECT value,
the ZEBRA display will not
appear.
FILM (CAM) MAIN MENU 2
Variable
Item
range
LOW LIGHT LVL
(FILM MENU) OFF
20%
25%
:
40%
(CAM MENU) 45%
S C U F E
SYNCHRO
3
SCAN DISP.
(CAM MENU) sec
%
(FILM MENU) deg
S C U F E
ECU MENU ON
DISP. OFF
S C U F E
Zebra pattern display
Video level
ON
109%
ZEBRA 2
DETECT
ZEBRA 1
DETECT
0%
VF
Remarks
display
USER For selecting the light level
ENG for the LOW LIGHT
display when the amount
of light entering the
camera is too low.
USER For setting the unit in
ENG which the synchro scan
mode is to be displayed.
USER For setting whether the
ENG menu screen is to be
displayed when menu
operations are performed
using the AJ-EC3
Extension Control Unit.
ZEBRA 2
OFF SPOT