Onkyo TX-DS595 Instruction Manual page 24

Listening to RDS broadcasts
Displaying Radio Text (RT)
If the station you are currently tuned into is broadcasting RT signals,
they will be displayed in the front display on the TX-DS595. If the
station does not, this function will be ignored.
1. To display the radio text, press the
RT/PTY/TP button once.
• If the current station you are listening to is not an RDS station,
only the frequency of the station appears.
• If "WAITING" appears on the display, more time is required to
receive the RT information. When the information is received,
the characters will scroll across the front display.
• If "NO TEXT DATA" appears on the display, RT information is
not available.
• The display shows the frequency for 3 seconds and returns to
program service name.
Performing a PTY scan
1. Press the FM input source button.
2. Press the RT/PTY/TP button twice.
The current program type appears on the
display.
3. Using the jog dial, select the PTY
program type you desire.
24
RT/PTY/TP
STANDBY/ON
STANDBY
POWER
ON OFF
DISPLAY RT / PTY/ TP FM MODE PRESET MEMORY TUNING PRESET
PHONES
AUDIO
DVD VIDEO 1 VIDEO 2 VIDEO 3 TAPE FM
SELECTOR
VCR
FM
4. Press the jog dial.
RT/PTY/TP
5. Press the jog dial when it reaches
Performing a TP scan
1. Press the FM input source button.
FM
2. Press the RT/PTY/TP button three
RT/PTY/TP
3. Press the jog dial.
DSP / MODE ADJ
PUSH TO ENTER
Jog dial
A SPEAKERS B
CH LEVEL
MASTER VOLUME
DSP / MODE ADJ SETUP
RETURN
PUSH TO ENTER
SMART SCAN NAVIGATOR
BASS TREBLE
AM PHONO C D
TX-DS 595
AV RECEIVER
The TX-DS595 will scan until it reaches a
station of the program type you selected. It
will then stop briefly at that station before
continuing on until it reaches the next
station. Pressing the jog dial stops the PTY
scan at that point. If you press the RT/PTY/
TP while "NONE" is displayed, "PTY ?"
will appear. In this case, return to step 3.
the station that you want to listen to.
"NOT FOUND" will appear when no RDS
signal is being received from the station.
times.
"< TP >" will appear if the current station is broadcasting TP
signals. This station will periodically broadcast traffic
information. To find a different station, proceed to the next step.
Also, if "TP" is displayed, proceed to the next step.
The TX-DS595 will scan until it reaches a
station broadcasting traffic information. If
"NOT FOUND" appears on the display, a
TP station cannot be located.
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
FM
RT/PTY/TP
DSP / MODE ADJ
PUSH TO ENTER