Onkyo TX-DS575x Instruction Manual page 22

Using Listening Mode
3. Use these buttons to
set the Listening mode
parameters.
(Refer to page 23).
VOL button (qup/udown)
Use this button to adjust the volume level.
CH SEL/LEVEL+/– buttons
1
LTI CH DVD VIDEO 1 VIDEO 2
PUT
2
STEREO /DTS SURROUND
STEREO
5ch STEREO TV LOGIC
Playing the DOLBY DIGITAL source
Dolby Digital
Playing the DTS source
DTS DTS (stereo)
22
POWER
2. LISTENING MODE buttons
These button allow you to select a
listening mode.
VIDEO 3 TAPE FM AM
LISTENING MODE
5 CH STEREO DSP
PRO LOGIC
ORCHESTRA
(Dolby Pro Logic)
STUDIO-MIX
Dolby Digital (stereo)
PTY/TP
DISPLAY
1. Input selector buttons
Select the desired input source.
3. Listening mode button
These buttons allow you to select a Surround mode.
Using Listening Mode
1. Press one of the INPUT SELECTOR buttons to select the
desired sound source.
2. Use the LISTENING MODE buttons to select the desired
PHONO C D
Listening mode.
STEREO: Press this button to listen to a normal stereo audio.
/DTS SURROUND: Press this button when you wish to
play Dolby ProLogic, Dolby Digital, or DTS Surround sound.
5CH STEREO: Press this button to play 5-ch stereo sound (see
page 21).
DSP √/®: Press this button repeatedly to select the desired
Listening mode. Each option appears as shown at left.
3. Play the selected source.
Notes:
Select a digital input to play Dolby digital or DTS sound
sources. (See page 18.)
You cannot select Orchestra, Unplugged, Studio-Mix, TV
Logic, or 5ch Stereo if you have selected a Dolby digital or
DTS surround source.
To play a Dolby digital or DTS Surround source, you need to
connect the sound source using the digital input connector.
UNPLUGGED
When you play the Dolby Digital or DTS Surround source, the
TX-DS575X automatically enters Dolby Digital Surround (ste-
reo) or DTS Surround (stereo) mode respectively.
Follow the steps below to make adjustment to the speaker level
set by the Test Tone.
1. Press the MODE AUDIO button.
2. Press the CH SEL button to select a speaker.
3. Press the LEVEL +/– buttons to adjust the level.
MASTER VOLUME
VOLUME knob
Use this knob to adjust
the volume level.
1. Press the MODE
AUDIO button
2. INPUT SELECTOR buttons
Select the desired input source.