USING THE MEMORY FUNCTION
NOTES: • The measurement value number is displayed
briefly in the Pulse Display area when you press
the Up/Down buttons (
• The date and time are alternately displayed with
the measurement values.
• If the date and time are not set, "-:--" is displayed
with the measurement values.
• Press the button repeatedly to display the next
values.
• Press and hold the button to display the values
faster.
TO DELETE ALL VALUES STORED IN THE MEMORY
The values stored in the memory are deleted by USER ID.
You cannot partially delete values stored in the memory. All values for
the user you select will be deleted.
1. Press the START/STOP button to turn the monitor on.
2. Select your USER ID (A or B).
3. While holding the Down button (
more than five seconds until the display appears as it does in the following
illustration.
4. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after five minutes.
).
), press the START/STOP button down for
20
Alternating
display